Cogan Blog
Insights, guides, and industry trends on mezzanines, industrial storage, and warehouse optimization.
Articles are compiled from publicly available industry sources for informational purposes only. Images are illustrative and actual products may vary.
How to Order Cantilever Racking: A Quote-Ready Checklist
To order cantilever racking, provide a load schedule, a measured layout, the handling method and the site's installation conditions. Those inputs allow the supplier to select the configured system and provide meaningful capacity and pricing information. Ordering from a photograph or rack height alone leaves important decisions unresolved.
Used vs New Cantilever Racking: What to Compare Before Buying
Compare used and new cantilever racking on suitability, documented capacity, condition, completeness and installed scope. A low purchase price does not establish that a used rack matches your loads or can be installed as supplied. Start with the storage requirement, then assess each proposed system against it.
Narrow-Aisle Cantilever Racking: Check the Truck Before the Aisle
Very narrow aisle cantilever racking is a coordinated storage and handling arrangement. The truck, its load, the guide system and the rack layout must work together. Select the handling approach before committing to an aisle width; a narrow drawing alone does not establish a workable warehouse.
Outdoor Cantilever Racking: Finish, Roofing and Site Planning
Outdoor cantilever racking needs a design that accounts for the stored loads and the site's environmental and support conditions. Finish selection, drainage, foundations or slab conditions, and any roof are part of that discussion. An indoor rack should not be moved outdoors or fitted with a canopy without review.
Single-Sided vs Double-Sided Cantilever Racks
Single-sided cantilever racks provide storage access from one side of the columns; double-sided configurations provide arms on both sides. The choice depends on available access, load distribution, handling routes and the approved structural arrangement. Double-sided does not automatically mean twice the usable capacity of a given floor area.
Cantilever Racks for Sheet Material: Supports, Overlays and Access
Sheet material storage needs support across the intended load and a handling method that keeps the material controlled during placement and retrieval. Cantilever racks may suit the application, but arms, overlays or other accessories must be selected for the specific material and approved rack configuration.
Industrial Pipe Storage Racks: Cantilever Planning for Tube and Bar
Cantilever racks can provide accessible storage for long pipe, tube and bar stock. The design needs the material's length, weight, bundle shape and support requirements. Round or irregular items also require an appropriate retention and handling plan; the open front of a rack does not remove the need to control the load.
Cantilever Lumber Storage Racks: Planning a Lumber-Yard Layout
Cantilever racks provide open-front storage for long materials such as lumber. A useful lumber-yard layout starts with the stock lengths, bundle weights, picking method and exposure to weather. Rack dimensions should follow that information, rather than treating every lumber bundle as interchangeable.
Heavy-Duty Cantilever Rack Capacity: What Buyers Need to Check
Cantilever rack capacity is specific to the configured arms, columns, bases, bracing and load arrangement. An arm rating alone is not the capacity of the entire rack. Begin with the dimensions and weight of each stored load, then have the supplier confirm the complete configuration on the project documents.
© 2025 Cogan Wire and Metal Products Ltd., all rights reserved.

