How to

Teach. Learn. Build.

Cogan Blog

Insights, guides, and industry trends on mezzanines, industrial storage, and warehouse optimization.

Articles are compiled from publicly available industry sources for informational purposes only. Images are illustrative and actual products may vary.

Cantilever Rack Bracing: What to Check Before Changing a Row
Cantilever Racking

Cantilever Rack Bracing: What to Check Before Changing a Row

Cantilever rack bracing is part of the structural system and must be reviewed before a row is extended, shortened or altered. Do not remove a diagonal to create access or assume that adding columns repeats the existing design automatically. Start with the original drawings and have the proposed configuration assessed as a complete row.

4 min read
Tool Crib Inventory: Build a Clear Checkout, Return and Repair Process
Partitions

Tool Crib Inventory: Build a Clear Checkout, Return and Repair Process

A useful tool crib combines a physical access boundary with a clear record of where tools are, who has them and whether they are ready for use. Define checkout, return and repair handling before adding more shelves. A locked enclosure controls entry, but it does not by itself keep an accurate inventory.

5 min read
Floor Angle Guides: Where Low-Level Rack Protection Fits
Rack Protection

Floor Angle Guides: Where Low-Level Rack Protection Fits

Floor angle guides create a low boundary along a rack or other protected area. They are useful to evaluate where the exposure is close to the floor and a continuous run is appropriate. Compare their coverage, mounting and operating clearances with individual rack post protectors and end guards before specifying a layout.

4 min read
Mezzanine Flooring: Compare Decking for Carts, Storage and Work Areas
Mezzanines

Mezzanine Flooring: Compare Decking for Carts, Storage and Work Areas

Mezzanine flooring should be selected as a complete deck assembly for the way the platform will be used. Compare the walking surface, support spacing, wheel loads, cleaning conditions and work below the platform before choosing a material. A floor that suits hand-carried cartons may need a different specification when small-wheel carts, shelving legs or equipment introduce concentrated loads.

5 min read
Tenant Storage Locker Turnover: A Checklist for Property Managers
Lockers

Tenant Storage Locker Turnover: A Checklist for Property Managers

Tenant storage locker turnover works best as a documented handover: confirm the correct compartment and authority to access it, record its condition, complete any approved maintenance, and update the assignment before releasing it to the next resident. An apparently empty locker is not enough to establish that reassignment is ready.

5 min read
Warehouse Guardrails After an Impact: Document, Assess and Restore
Guardrails

Warehouse Guardrails After an Impact: Document, Assess and Restore

After a warehouse guardrail is struck, control the affected area, document the contact and have the complete installation assessed before restoring normal operation. A straight-looking rail does not establish that its posts, connections, anchors or supporting concrete are unchanged. The response should follow the site's incident procedure and the manufacturer's instructions for the installed system.

5 min read
Replacement Cantilever Rack Arms: Check Compatibility Before Ordering
Cantilever Racking

Replacement Cantilever Rack Arms: Check Compatibility Before Ordering

Replacement cantilever rack arms must match the original rack system and its approved loading arrangement. Confirm the manufacturer, arm identification, connection geometry, length, load distribution and column configuration before ordering. An arm that appears to fit the bolt holes is not automatically compatible or suitable for the stored load.

5 min read
Wire-Mesh Cage Roofs: Close the Security Boundary Without Losing Service Access
Partitions

Wire-Mesh Cage Roofs: Close the Security Boundary Without Losing Service Access

A wire-mesh cage roof closes the top of an enclosure when the security boundary cannot rely on the building ceiling. Plan it with the wall panels, supports, gate, overhead services and maintenance access. A mesh roof is an enclosure component; it is not automatically a storage shelf, working platform or approval of the building's fire-protection arrangement.

5 min read
Pallet Rack Column Protectors: Check Fit, Footprint and Fork Clearance
Rack Protection

Pallet Rack Column Protectors: Check Fit, Footprint and Fork Clearance

Pallet rack column protectors should fit the upright and its surroundings without creating a new obstruction for handling equipment. Measure the post, baseplate, anchors, low bracing and available aisle space, then check the proposed protector against the truck and load movement. Selecting only by protector height leaves important fit questions unanswered.

5 min read