Cogan Blog
Insights, guides, and industry trends on mezzanines, industrial storage, and warehouse optimization.
Articles are compiled from publicly available industry sources for informational purposes only. Images are illustrative and actual products may vary.
Wire-Mesh Partition Cost: Comparing Complete Enclosure Quotes
Wire-mesh partition cost depends on the enclosure's dimensions, support arrangement, doors, roof requirements and installation scope. A panel price alone does not represent the cost of a usable storage cage or divided workspace. Compare proposals against one clear layout and operating requirement.
Used vs New Cantilever Racking: What to Compare Before Buying
Compare used and new cantilever racking on suitability, documented capacity, condition, completeness and installed scope. A low purchase price does not establish that a used rack matches your loads or can be installed as supplied. Start with the storage requirement, then assess each proposed system against it.
Warehouse Traffic Management: Where Barriers Fit in the Plan
Warehouse traffic management combines routes, operating practices and physical layout. Barriers can help define boundaries and protect selected areas, but they should be placed as part of that wider plan. Start with the movement of vehicles, loads and people, then decide where a physical boundary will improve the arrangement.
Machine Guarding Fences: What to Define Before Ordering Panels
A machine guarding fence is one part of a safeguarding design. Before ordering panels, define the machine hazards, access tasks, required separation and any safety-related gate or control functions. Fence height and color alone cannot establish that the complete machinery installation is adequately safeguarded.
Narrow-Aisle Cantilever Racking: Check the Truck Before the Aisle
Very narrow aisle cantilever racking is a coordinated storage and handling arrangement. The truck, its load, the guide system and the rack layout must work together. Select the handling approach before committing to an aisle width; a narrow drawing alone does not establish a workable warehouse.
Guardrails Around Conveyors and Production Equipment
Guardrails around conveyors and production equipment should address vehicle exposure while preserving operation, inspection and service access. They do not replace the machine's own safeguarding. A useful layout treats the vehicle boundary and the machinery hazard controls as related but separate design questions.
Wire-Mesh Partition Installation: A Site-Readiness Checklist
Prepare for a wire-mesh partition installation by confirming the approved layout, supporting conditions, access openings and building interfaces. The appropriate instructions depend on the selected enclosure and gate configuration. A general checklist can organize the project, but it should not replace the relevant manufacturer documents.
Outdoor Cantilever Racking: Finish, Roofing and Site Planning
Outdoor cantilever racking needs a design that accounts for the stored loads and the site's environmental and support conditions. Finish selection, drainage, foundations or slab conditions, and any roof are part of that discussion. An indoor rack should not be moved outdoors or fitted with a canopy without review.
Removable Warehouse Guardrails: Planning Maintenance Access
A removable guardrail can provide temporary equipment access within a planned protective boundary. Its value depends on a defined opening, the correct manufacturer-specified components, and a clear process for controlling the area while the rail is out and restoring it afterward.
© 2025 Cogan Wire and Metal Products Ltd., all rights reserved.

