Cogan Blog
Insights, guides, and industry trends on mezzanines, industrial storage, and warehouse optimization.
Articles are compiled from publicly available industry sources for informational purposes only. Images are illustrative and actual products may vary.
Industrial Partition Walls: Dividing a Warehouse Without Blocking Work
An industrial partition layout should define the area that needs separation while preserving the movement, access and services required around it. Start with the reason for the boundary and the work performed on both sides. A partition is most useful when its doors and dimensions fit the operation it encloses.
Single-Sided vs Double-Sided Cantilever Racks
Single-sided cantilever racks provide storage access from one side of the columns; double-sided configurations provide arms on both sides. The choice depends on available access, load distribution, handling routes and the approved structural arrangement. Double-sided does not automatically mean twice the usable capacity of a given floor area.
Single vs Double-Rail Guardrails for Industrial Facilities
Single- and double-rail guardrails provide different vertical coverage. Choosing between them starts with the equipment or area being protected and the expected contact exposure. The number of rails does not, by itself, establish the complete system's impact performance or suitability for an elevated edge.
Sliding vs Swing Gates for Warehouse Partitions
Choose a partition gate by its clear opening, operating space and access task. A swing gate needs room for its leaf to move; a sliding gate needs an appropriate travel and support arrangement. Neither should be selected from opening width alone.
Cantilever Racks for Sheet Material: Supports, Overlays and Access
Sheet material storage needs support across the intended load and a handling method that keeps the material controlled during placement and retrieval. Cantilever racks may suit the application, but arms, overlays or other accessories must be selected for the specific material and approved rack configuration.
Forklift Barriers: How to Read an Impact-Rating Claim
A forklift barrier rating describes performance under specified conditions. It should be read with the tested configuration, vehicle mass, speed, impact direction and installation requirements. A headline number alone cannot establish whether a barrier suits a particular warehouse exposure.
Wire Mesh vs Sheet Metal Partitions: Visibility or Privacy?
Wire-mesh partitions provide a visible, open enclosure; sheet-metal partitions provide an opaque boundary. The choice starts with whether the area needs visibility, privacy or a defined combination. Then review access, support and the specific hazards or security requirements of the application.
Industrial Pipe Storage Racks: Cantilever Planning for Tube and Bar
Cantilever racks can provide accessible storage for long pipe, tube and bar stock. The design needs the material's length, weight, bundle shape and support requirements. Round or irregular items also require an appropriate retention and handling plan; the open front of a rack does not remove the need to control the load.
Pedestrian Safety Barriers: Planning Warehouse Walking Routes
A pedestrian barrier should make the intended walking route clear and guide people toward planned crossings. Its layout must account for the places employees actually go, the vehicles they encounter, and the access needed for normal work. Choosing a rail is only one part of that plan.
© 2025 Cogan Wire and Metal Products Ltd., all rights reserved.

